The entrance to this beautiful home in Littleton was stamped, using Miracote's Mirastamp. The color was achieve topically with Mirastain II---the main color is Beech Tree, with highlights of gray.

The views, the wildlife, what a magnificent setting. Our job was to repair and stamp an entryway that complement the surroundings. The border and steps were stamped with Mirastamp and then the new stamped work, plus the existing stamped areas, were colored with Smith's Color Floor Desert Sand.

A beautiful stamped patio. The Miracote Mirastamp overlay material was colored with Provincial Tan and then stamped. Once cured, Donie and Chuy topically applied Bronco Brown and Charcoal colors in Mirastain, to provide the custom highlights. When the color was just right and Jana and John were happy with the look, two coats of solvent-based sealer and slip resistant additive were applied.

The SkyView Academy took great pride in the design and functionality of its new facility. To make sure the students and visitors felt the school pride from the moment they entered the building, we were asked to apply a stamped overlay to the entry, including a compass rose with the school colors. It was a great project to be a part of.

This 13th floor penthouse balcony turned out beautiful with a stamped overlay finish.

Rather than using a template, the flagstone pattern was taped to give the pool deck a more natural appearance. Miracote MPC, slop trowel and the color Grizzly were used on this project.

The homeowners wanted to resurface the eating area on the upper level of this beautiful home in Centennial. A stamped border was put around the outside of the deck and then the first coat of modified cement was troweled, the second coat sprayed and knocked down to give the beautiful texture. The ashlar pattern was saw cut and the project was sealed with concrete sealer and slip resistance material.

After the repair work was completed, the goal was to pull the colors from the rock wall into the slop trowel overlay. The stippled border adds an attractive accent to the patio.

The Universal Template was applied between the pillars to provide a unique look to the patio of this beautiful home in Littleton. The center areas are sprayed and highlighted to complement the texture and color of the house.

Miracote MPC was troweled on the cinderblock sitting wall and concrete flower box. Custom colors were applied and the wall was sealed with a solvent-based sealer.

Carol and Dan had their 450 rectangular-shaped deck taken out and replaced it with a 575 square foot, beautifully shaped, scalloped patio. The colors and design were selected to complement the shape of the patio and the colors of the brick on the house.

This 60 year-old garage in Washington Park was used for much more than just parking cars, so the homeowners wanted to clean up the floor. Concrete stains and dyes, along with sweeping ribbons of color were used to mask years of dirt and oil stains. The walls have been dry-walled and painted and the new party room is open!

This artist's studio floor was achieved using a modified cement coating for the texture and various dyes and stains for the colors.

This is a wonderful example of the richness and beauty of acid staining. Once stained, the floor was cut to achieve the circular brick pattern and sealed to protect the surface and give it it's shine.

The floor of this beautiful church was stained with Brickform coffee and amber, sealed with Key Resin urethane and then waxed. It was a pleasure to work with Great West Construction on this project.

To make Lindsay and Jason’s outdoor living space comfortable and one-of-a-kind, we applied a knocked down cementious overlay on the fire pit, dividing wall and kitchen area walls. We followed up with mottled, pigmented concrete sealer on the two patio areas, and a solid pigmented stain on the stairs.

The walkways of this LaQuinta Inn were in need of repair and a fresh, clean look. We used hand grinders to remove the loose overlay, filled the areas with repair mortar, sprayed the walkways with a polymer modified cement and then stained the surface with H&C pigmented sealer. The walkways were repaired and returned to their original color.

We used two colors to mottle this patio in Lakewood. The tile and circular brick were cut with a concrete saw and then using a template and concrete engraver, the sunburst was engraved and colored.

The garage is no longer the neglected room. Cabinets provide a place to put things away and finished floors reduce the dust and dirt tracked into the house and make it an enjoyable place to work. A clear epoxy with light blue, tan, white and black vinyl chips gave this garage a beautiful look. Notice the logo in the floor?

Concrete counter tops are becoming a popular alternative to stone and tile. Black epoxy with a copper dispersant makes this beautiful counter top perfect for the bathroom, bar or any area in need of a sleek contemporary look.

The countertop was poured with the material integrally colored the salmon color. The green stain was added and the counter was sealed with polyaspartic. The basin was poured integrally colored green and sealed.

ConAgra's Denver flour mill needed an easy to clean floor. The existing coating was ground off, exposing some of the aggregate in the concrete floor. 3/8" saw cuts were made and filled with safety-yellow epoxy to identify safety areas and walkways. The final step was to squeege and backroll two coats of Miracote's water-based epoxy over the surface. Beautiful, durable and easy to clean.

Jay's garage and storage area are now functional and beautiful. Once ground, the concrete was primed, a Spanish Tile colored, epoxy bond coat was rolled and black and white vinyl chips broadcast into material. Once cured and excess ships picked up, a clear top coat was applied.

The floor was first acid stained. Then, using a concrete saw, we cut the 1/8” inch deep circular brick into the concrete—cutting away the color and giving a grout lines. Using a template, engraving the pattern, and filling the areas with red and green self-leveling epoxy made the grapes in the center of the circular brick.

This concrete floor was built over plywood: metal lathe and repair mortar sbustrate, overlay, concrete dye, saw cut pattern filled with grout, sealer and wax. A beautiful one-of-a kind concrete floor.

This walkway connects the decorated driveway in front and the patio in back. The steps were stained and saw cut to complement the colors and patterns of the driveway and patio. Note the staining of the concrete window-well.

Garages are used for cars. They are also often where you will find the workshop. This workshop has a floor that is durable, easy to keep clean and attractive. The saw cuts are filled with black grout to give the floor a flat surface.

To match the size and shape of the rock on the side of this Golden home, we took a picture of the house and made a custom template. We engraved the border using the custom template, and then colored the individual rocks.

The Divided Dish is 15” (l) x 6 ¾” (w) x 2” (h). The dish is a wonderful additional to an indoor or outdoor dining table. It can be ordered in a variety of colors, including concrete gray and white.

The wine rack is 14 ¼” (l) x 5” (w) x 3” (h). It comes in a variety of colors--let us make one to match your new countertop!

This special order doggy diner is going to make 'the guys' very happy. The center bowl for water, the two outer bowls for food for the two dogs. It is Sedona (tans and browns) in color and 14" high (medium sized). The diner was purchased to match the family concrete countertop.

The Square Bowl is 9 ¼” (d) x 4” (h). It comes in a variety of colors to match your indoor or outdoor decor.

Concrete stepping stones. Evidently difficult to find in the Denver area, so our customer asked us to build 18 custom concrete stepping stones. Formed, poured, sanded and sealed in the shop, these 2' x 2', 1 1/2" thick reinforced stones make a beautiful back yard area. If interested in something like this or you have your idea, give us a call!

This high-rise balcony was stamped with Mirastamp and topically stained with alcohol and pigment. The protection and sheen is a result of the Miracote HD II sealer.

The lower patio is a concrete slab with a taped ashlar pattern overlay. The upper deck is a MiraflexII decking system over plywood, with the same overlay. Check out our Blog for more information on this project.

3,000 SF of decking was completed with the Miraflex II decking system. Upper level living spaces were enhanced with the benefit of waterproofing lower levels and beauty of a textured modified concrete floor. The projects were conducted in early Spring so they needed to be tented to keep rain and snow off the surface and existing outdoor kitchens and fireplaces dictated specific color schemes.

We had the pleasure of working with the Vail Racquet Club to apply the Miraflex II decking system to an upper deck. Metal lathe, repair mortar, membrane A, MPC and sealer were all used to make this waterproofed, durable and attractive finish.

This 13th floor penthouse balcony turned out beautiful with a stamped overlay finish.